Search
Filters
Close

DeatschWerks 550cc Injectors (6)

Set of 6 + Needed adapters
Estimated Lead Time: 1-2 Weeks
$469.95

 

  • Bolt-In high flow injectors
  • Includes O-rings
  • E85 compatibility
  • Flow rates and set balancing in-house by DeatschWerks
  • Flow balanced to within 1-2% (flow report included)
  • Excellent spray pattern and atomization for optimized idle and tuning
  • Technical assistance and tuning data available via phone or email to Deatschwerks
  • 3-year comprehensive warranty
Fuel Pressure Range 40-100 psi
Minimum Pulse Width 1.2 ms
Maximum Duty Cycle 91%
Coil Impedance 14.8 ohm
Injector Type Bosch EV6 (standard)
Connector Type Minitimer


Note that these injectors do not have the groove for the OEM alignment clips.  They install fine without them but you will need to align the plug during install to ensure they are aimed correctly so the OEM wire harness can plug in. 

These Injectors are larger than the factory injectors so please expect the need to retune for these. 

Current lead time is 1 week. 

Nominal Static Flow Rate

PSI > 43 58 70 80 90 100
cc/min 542 630 709 763 821 859
lb/hr 51.6 60.0 67.5 72.7 78.2 81.8

Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order.


Offset in Milliseconds (Pressure vs Voltage)

PSI >

Volts v

43 58 70 80 90 100
8 1.60 1.79 2.12 2.30 2.37 2.52
9 1.30 1.51 1.55 1.77 1.93 1.95
10 0.99 1.30 1.36 1.50 1.64 1.60
11 0.80 1.10 1.17 1.30 1.39 1.27
12 0.69 0.95 1.00 1.13 1.23 1.14
13 0.51 0.73 0.85 0.96 1.08 0.95
14 0.45 0.54 0.78 0.83 0.95 0.84
15 0.31 0.49 0.64 0.75 0.79 0.67
16 0.21 0.41 0.57 0.62 0.62 0.57