We can now make spare Keys for the SLK230, SLK320, SLK32 and Chrysler Crossfires
- Switch Blade Fully Functional Key = These will manually lock or unlock the driver door, glovebox and ignition and run the car AND ALSO have keyless lock / unlock / panic buttons Functions (The buttons will work). 3-Button remotes for North American Cars, 2 button remotes for export cars around the world.
- Traditional Valet Key = These will manually lock or unlock the driver door, glovebox and run the car but NOT have keyless lock / unlock / panic buttons Functions. They will look like a traditional key.
If you DO have an existing fully functional Original Key that does ALL the following, we can use just that to build your additional Key(s).
A. Turns in the driver’s door lock.
B. Turns in the glove box lock.
C. Turns in the ignition AND starts the car and remains running.
D. Has functional keyless lock/unlock/panic buttons.
If you DO NOT have a functional key for us to copy from, we will need the following parts and need to perform a SKREEM Repair/Refurbishment to enable us to create the Key(s).
A. Drivers door lock, assuming your ignition has never been changed to another key cut. We will send instructions for removal.
B. Your SKREEM module (located behind the instrument cluster). We will send instructions for removal.
C. Your Engine Computer, sometimes referred to as PCM or ECU. The ECU is in the black plastic box next to the vehicle battery under the hood. We will send instructions for removal.
D. Your old Antenna ring, we will replace this with a new one. We will send instructions for removal.
In either scenario, we will also need the following to prove ownership.
- A copy / picture of the current state issued vehicle Registration (cannot be expired) or Title. Current state issued registration is preferred and processes quicker. If your registration is expired, send the title instead as there is no expiration date. You can email a picture or print it out and include in the box with your parts.
- A copy / picture of the matching owner's Driver’s License or State Issued Identification (cannot be expired). You can email a picture or print it out and include in the box with your parts.
Current turnaround time is 2-3 weeks while we are going through our backorder list of customers that have been waiting on FCA to supply replacement Keys since June 2019. We can create these keys for North American as well as EXPORT model Crossfires.
This process requires a tremendous amount of time to get through each cars code while retaining the factory VIN in harmony so that if Chrysler ever does begin to produce VIN coded parts again, we are still in sync. This means you will still be able to Pass State Vehicle Emissions Testing and / or Sell the vehicle with the same VIN in the system as the VIN on the Chassis and Title. We are not swapping junkyard parts.
Once we receive your order, we will then email you with instructions to remove the needed parts and directions for shipping them to us.